Mirage 3 Dig Evo FM-AEV AUDIO PROCESSORE

MIRAGE 3 DIG EVO FM-AEV AUDIO PROCESSOR

MIRAGE DIG EVO the new Digital Audio Processor AEV

The Mirage Dig Evolution is a fully digital audio processor, based on DSPMirage Dig Evo technology is a complete audio signal processing processor for AM, FM and TV broadcasts.

Digital audio inputs/outputs l AES/EBU and Optics

Balanced analog audio inputs/outputs

AES/EBU standard, 24 bit resolution low structural latency of the signal ( 3 ms )

Four-band audio processing and compression

Input switching with selectable backup function, and more.

Limited special offer
€1,440.00 €1,600.00
-10%
Size chart
Women's clothing size
SizeXSSML
Euro 32/34 36 38 40
USA 0/2 4 6 8
Bust(in) 31-32 33 34 36
Bust(cm) 80.5-82.5 84.5 87 92
Waist(in) 24-25 26 27 29
Waist(cm) 62.5-64.5 66.5 69 74
Hips(in) 34-35 36 37 39
Hips(cm) 87.5-89.5 91.5 94 99
How To Measure Your Bust

With your arms relaxed at your sides, measure around the fullest part of your chest.

How To Measure Your Waist

Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.

Reference:
Mirage 3 Dig Evo FM-AEV AUDIO PROCESSORE BROADCAST
Brand:
Love0
Add to compare0
Add to wishlist
Description

GENERAL SERVICES

Frequency Response

20Hz ÷ 15 KHz FM version

20Hz ÷ 20 KHz HD version

20Hz ÷ 10 KHz AM version

Stop band rejection > 78 dB over 17 KHz

Noise > 65 dB in all conditions (depends on processing)

Total distortion < 0.01 %.

Total system separation > 67 dB (30 Hz - 15 kHz)

ANALOG AUDIO INPUT

Left and Right configuration

Impedance 10 K ohm / 600 ohm balanced

CMRR > 45 dB from 30 to 15 Khz

A/D conversion Sampling frequency 192 kHz

Sensitivity ±12dBu

Maximum input level +15 dBu

XLR type connector, female,

Pin 1 Chassis Pin 2 and 3 electronically balanced, floating and symmetrical

 DIGITAL INPUT

AES 3 professional digital input configuration (IEC-60958)

Digital AES 3 Input Impedance 110 ohm balanced

XLR female AES 3 digital input connector

Sampling frequency Automatic lock 32 - 44.1 - 48 - 96 KHz

Resolution 24 Bit

ANALOG AUDIO OUTPUT

Left and Right configuration. Flat or pre-format (50μS - 75μS)

Electronically balanced and floating 30 ohm impedance

Minimum load impedance 600 ohms

Maximum output level +15 dBu in 600 ohm load

XLR type connector, male

Pin 1 Frame

Electronically balanced, floating and symmetrical pins 2 and 3

 DIGITAL OUTPUT

Digital output sampling rate software selectable 32 - 44.1 - 48 - 96 KHz

Resolution 24 Bit

AES 3 Transformer Balanced stereo digital output configuration (IEC-60958)

Balanced digital output impedance 110 ohms

Digital output level - 12.00 / 0 dBFS adjustable

XLR male digital output connector

STEREO GENERATOR (MPX version only)

Configuration an output

Pilot Freq. 19 KHz ± 0.001% Max on temp.

Pilot injection +4 ÷ 12

Distortion < 0.005 % @1 kHz

Acoustic signal ratio 70 dB (Din Audio, Bypass mode) Typical

Stereo separation 60 dB Typical

Main to Large Sub crosstalk 48 dB 30-15 kHz

Large Sub to Main Crosstalk 46 dB 30-15 kHz

Subcarrier suppression 38 kHz 70 dB Typical

Suppression 76 kHz 70 dB Typical

Composite audio level 0 ÷ 12dB

BNC connector

Output impedance 50 ohms

DATA

Ethernet / RS232- terminal interface on the back, asynchronous

Full duplex data input

Selectable format

Serial transmission speed 2400 ÷ 19600 baud

RJ45 / RS232/ USB connector

Microprocessor controlled data management

Non-volatile memory Flash data retention 10 years

Logical I/O

DB15 female cannon connector

GENERAL

Mains voltage 90 - 260 Vac / 50 Hz full range

Dimensions (WxHxD) 48.3 x 19.4 x 4.4 cm 1 rack unit

Weight 3.5 Kg.

Working temperature 0 ÷ 50° C.

Working humidity.                             Max 95% non-condensing

Product Details
Mirage 3 Dig Evo FM-AEV AUDIO PROCESSORE BROADCAST
Reviews
No comments
Related products
No items

Menu

QR code

Settings

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in