FM TRANSMITTER 1200 WATTS-AXON 1200W-MONO-MPX

AXON 1200W

Professional stereo FM transmitter with dynamic RDS and WEB/SNMP connectivity.

Audio input modulation selectable in MPX (Composite), Stereo, Digital AES/EBU or Mono

Frequency modulation from 87.5 MHz to 108.0 MHz. 

Works as a high power, 50W to 3000 Watts FM amplifier Exciter. WEB connectivity for remote access. The best option for high end sound lovers.

AXON has a warm audio softness, achieves deep, clean and crystal clear sound. 

Excellent audio quality: brings out your sound. Gives you a big advantage over your competitors!

Limited special offer
€4,400.00 €5,500.00
-20%
Size chart
Women's clothing size
SizeXSSML
Euro 32/34 36 38 40
USA 0/2 4 6 8
Bust(in) 31-32 33 34 36
Bust(cm) 80.5-82.5 84.5 87 92
Waist(in) 24-25 26 27 29
Waist(cm) 62.5-64.5 66.5 69 74
Hips(in) 34-35 36 37 39
Hips(cm) 87.5-89.5 91.5 94 99
How To Measure Your Bust

With your arms relaxed at your sides, measure around the fullest part of your chest.

How To Measure Your Waist

Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.

Reference:
AXON 1200W
Brand:
Love3
Add to compare0
Add to wishlist
Input
  • STEREO
  • MONO, MPX
Description

AXON 1200W

AXON is a Professional World-class Performance Low and Medium Power FM Transmitters.

AXON FM Transmitter guarantees superior transmission quality and reliability.

It has unmatched features and outstanding technical characteristics.

It makes it ideal for any FM broadcasting applications.

If you need to provide the best broadcast service, AXON is the ultimate solution that meets needs.

AXON meet most customer requirements and guarantees professional features at an affordable price.

AXON applications are as:

Community radios FM transmitter

Commercial radios FM transmitter

Religious radios FM transmitter

Educational radios FM transmitter

Other non-profit radio groups FM transmitter

Big National Networks FM transmitter

Public Radios FM transmitter

Drive-in movies radios FM transmitter

Theatres radios FM transmitter

Stadiums radios FM transmitter

Politic Radios FM Transmitter

AXON has a Compact architecture: both, exciter and amplifier fit on the same case.

The 50-volt LDMOS device technology delivers a dramatic increase in power density. It lower operating costs and reduced cost of ownership over the life of the transmitter.

To buy the AXON FM transmitter, visit our BMI Broadcast Market Italy e-shop.

In BMI we sell AXON family of FM Transmitters at the best price of the market.

HIGHLIGHTS

Excellent audio fidelity with soft, deep and clean crystal sound. 

Made in aluminium, Air filter and PCB boards tropicalized

Aluminium air ducted.

Copper Carrier on active power components such as LDMOS or unbalanced loads resistors

Uninterrupted service thanks to intelligent software protections

Free failure design thanks to hardware fast protections

Protection against Lightning, Dust and Corrosion

Designed to be rough itself. All components that determine the reliability are over-dimensioned. The Heatsink, LDMOS, Fans, Unbalanced load resistors and Power 

        supply.

Solid State LDMOS technology up to 80% High Efficiency constant at any power level

Friendly User Interface with LCD front panel display, Direct Keys and LEDs indicator. It shows transmitter status and allows smart browsing with ENTER and ESC Keys.

Scheduler Power Derating

Remote control by WEB TCP/IP and SNMP of all parameters. Control of the transmitter by internet without any external box or accessories. 

Parallel remote control connectors

Top seller in Governmental, Private Networks, Commercial and Community radio stations

MAIN SPECS

Produced in a wide range of power: 30W (30 watts), 50W (50 watts), 60W (60 watts), 100W (100 watts), 150W (150 watts), 300W (300 watts), 500W (500 watts), 

        600W (600 watts), 1000W (1000 watts, 1kW) and 1200W (1200 watts, 1,2kW), 2000W (2000 Watts, 2kW) 2400W (2500 Watts, 2,5kW). 

Audio input and modulation selectable. MPX (Composite), Stereo, Digital AES/EBU or Mono. 

Very low signal to noise better than 90dB. Very low distortion and high stereo separation thanks to digital stereo coder.

Total spectral purity: better than -90 dBc spurious and harmonics. I grant highest RF signal quality.

Analogue Frequency Modulation from 87.5 MHz to 108.0 MHz . Setting in 10 kHz step and a frequency stability better than 2 ppm. Japanese (JPN) JAPAN, Russian 

        (OIRT 66 - 47 MHz) and more bands are options available.

Exclusive Distortion-less Intelligent Soft Limiter keeps the deviation in the 75kHz limits.

Dynamic RDS encoder with TMC function

N+1 Profiles connector provides 7 different memories selection. Memory settings are in the internal memory. Can be set by remote or in local.

Ultra compact size 2U

Full- range power supply: 180-260 vac mains voltage

Compliant with all the standard: ETSI – CCIR – FCC. Meets all the most rigorous electromagnetic quality standards

EXELLENCE AUDIO FIDELITY WITH SOFT, DEEP AND CLEAN CRYSTAL SOUND. VERY LOW SIGNAL TO NOISE, VERY LOW DISTORTION AND HIGH STEREO SEPARATION.

The Sound Quality of the Music, the most important feature of AXON Series. It features with Warm Softness, Deep and Clean Crystal Sound. 

This excellent audio quality highlights the mood of the radio. This sound provide a competitive advantage with any others brand of transmitters. 

Very low S/N typical 85 dB, high stereo performance coder with typical 65 dB Stereo Separation. Ultra Low distortion 0,01%. 

Exclusive Distortion-less Intelligent Soft Limiter keeps the deviation in the 75kHz limits.  It gives the maximum possible audio volume without any kind of distortion.

AES-EBU digital input 24 bit resolution with 32, 44.1, 48, 96 KHz sample rate automatically selected

MECHANICS MADE IN ALUMINUM, AIR FILTER AND PCB BOARDS FULLY TROPICALIZED

The mechanics parts of the transmitter are all made in aluminium. It provides low weight and robustness.

Equipped with an AIR FILTER mounted on the front panel, easy to clean or replace. 

PCB Boards and the wiring tropicalized with a specific coating.

These precautions guarantee a long life in extreme environmental conditions. Prevent damage due to corrosion and erosion. Protect the components from the inclemency of the tropical climate. Defend from humidity, salt and pollution.

ALLUMINUM AIR DUCTED 

The equipment fits into a compact rack mountable 2 Unit Aluminium cabinet.

An exclusive design of the air guides the air into aluminium ducts.  It's avoids contact of the air with the electronic components.

Every component that produces heat take place on the main heat sink. 

Air passes only into the aluminium heat sink. It avoids contact with the electronic components.

This avoid failures produced by the air corrosion

Copper Carrier on LDMOS Active components and unbalanced Resistors. EASY MAINTENACE

We mount the LDMOS or un-balancing resistors on copper support. It improves heat dissipation any help maintenance.

Products from other brands, mount LDMOS is on the heat sink. In this case becomes almost impos-sible to heat the weld when is necessary to replace the LDMOS.

A further problem is to test the new component into the entire system.

Easy maintenance, all parts are easy to replace. RF modules, electronic control boards, blowers and power supplies. Moreover, all models share the same spare parts.

UNINTERRUPTED SERVICE WITH HARDWARE AND SOFTWARE PROTECTIONS

There are two kinds of protection: Fast Hardware Protection and Soft Software Protections

When there is a short-circuit on the antenna or coaxial cable, the protection must be hardware. It must act in few nanoseconds. In fact, the software in this case is not fast enough to grant the protection of the equipment. 

When the fault condition is soft, like the increase of VSWR, a software protection can be use. The cause may be snow or humidity in the antenna system.

AXON FM Transmitter has both: Fast Hardware Protections and Soft Software Protections. 

The software protection reduces the output power without on-air interruption. Even if the transmitter is on air, it keeps the RF devices within a safe operating condition.

Protections of the transmitter works in case of:

Load mismatching, antenna short/open circuit

Environmental over-temperature

Cooling failure

Amplifier breakdown

Over and Under Voltage DC

Over and Under Voltage AC

RF and Power Supply Temperature

Lightning

Dust

Corrosion

DESIGNED TO BE ROUGH ITSELF

AXON FM Transmitter is on-air even in the worst case of operating conditions. To achieve this, the important components of the transmitter are all over-dimensioned.

All the aluminium heatsinks are twice big as necessary. 

Unbalanced dummy loads are twice the quantity needed

LDMOS RF amplifiers are 30% more powerful than the needed. They are 65:1 VSWR tolerant

Power supply deliver 30% more of power than the quantity used by the equipment at full rated power. 

HIGH EFFICIENCY FOR LOW ENERGY CONSUMPTION

AXON use Solid State RF power devices, 6th generation LD-MOS. They are High Efficiency and VSWR 65:1 tolerant. This characteristic provides high reliability and low energy consumption.

An intelligent algorithm maintains the high Efficiency constant at any power.  

This algorithm controls the Voltage of the Power Supply and the Bias.  

Thanks to this, the efficiency is very high at any frequency and at any output rate power.

USER FRIENDLY DIRECT KEYS AND LEDs INDICATOR USER INTERFACE

The user interface is composed by: LCD display, Direct Access Keys and LEDs indicators. 

It allows immediate control and visualization of the status of the transmitter.

Quick and easy navigation trough menus create User Interface friendly, simple and intuitive. It allows an immediate learning of the use. 

The user interface provides full control and measurements of all working parameter.

PARALEL REMOTE CONTROL CONNECTORS

Parallel Remote Control Connector with dry contact Outputs relay and opto-isolated inputs. The connector has several TC and TS available. Some of them are: on/off, local/remote, alarm status, Under and Over RF, Reset alarms. 

N+1 Profiles connector: provides 7 different memories selection. Memory settings are in the internal memory. Is possible set the profiles remotely and locally.

TOP SELLER IN GOVERNMENTAL, PRIVATE NETWORKS, COMMERCIAL AND COMMUNITY RADIO STATIONS

AXON Is one of the most used FM Broadcast Transmitter. Adopted on the Governmental and Private Networks, Commercial and Community Radio Stations.

For any application, AXON is the ultimate solution. Meets most demanding customer’ requirements. It's guarantees professional features at affordable price

AXON works as Low and Medium power transmitter. It's suitable in stand alone station or as driver in complex high power Transmitters and N+1 systems 

AXON GENERAL TECHNICHAL CHARACTERISTICS

AXON EXCITER/TRANSMITTER 30W TO 1200W 

Frequency Range: 87.5 ÷ 108.00 MHz, Programmable in 10 KHz steps

On request 66 ÷ 74 MHz (OIRT), 76 ÷ 90 MHz (JPN) Bands.

Frequency Stability: better than ±150Hz from -10 to +50°C

Modulation capability max deviation: +/-150kHz.

Frequency Control: Synthesizer µprocessor control.

Power Output: 30W, 50W, 100W, 150W, 300W, 600W, 1200W, 2000W, 2500W. Adjustable from 0W to maximum power.

Output Impedance: 50 ohm.

Display: forward/reflection power and modulation indicator

Type of Modulation: Direct frequency modulation of carrier frequency. F3E Stereo with  Subcarrier and Mono.

Lock in Time: Typ. 4 second.

Off Lock Attenuation: ≥ -80 dBc.

Modulation Mode: Mono, Stereo, Multiplex, SCA, RDS, Aux.

Pre-emphasis: Flat(0)/50/75 µs selectable from front panel.

Asynchronous AM S/N Ratio: -60 dB below reference carrier. 100% AM modulation @ 400 Hz, without FM modulation.

Synchronous AM S/N Ratio: -60 dB below reference carrier. 100% AM modulation@ 400 Hz with FM modulation ±75 KHz @ 400 Hz.

RF Harmonics: Exceeds ETSI/EBU/CCIR/FCC requirements. better than 84 dbc

RF Spurious:  Exceeds ETSI/EBU/CCIR/FCC requirements. better than 84 dbc

Output Connectors: 30W to 600W N type connector, 1200W DIN 7/16 type connector

Output power on/off and adjustable from front panel and remotely.

Overall Efficiency up to 80%.

Monitor RF: -60 dBc, BNC connector

VSWR: 1.5:1 Maximum with automatic fold-back at higher VSWR 

MONAURAL OPERATION

Audio Input Impedance: 600 ohm balanced, 15 Kohms unbalanced.

Audio Input Level: -6 to +12 dBm. (Other range on request) 

Input Connector: XLR female.

Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz. 

Total Harmonic Distortion + Noise: 0.03% @ 400 Hz

Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio

Transient Intermodulation Distortion: 0.03%, 2.96KHz square wave and 14 KHz sine wave.

FM S/N Ratio: -89 dB RMS detector, -85 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.

MULTIPLEX OPERATION

Composite Input Impedance: 5 Kohm unbalanced.

Composite Input Level: 3.5Vp-p for ±75KHz deviation.

Input Connector: BNC female.

Composite Amplitude Response: : ≤ ± 0.1dB, from 30Hz to 53kHz

Total Harmonic Distortion + Noise: 0.03% @ 400 Hz

Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio

Transient Intermodulation Distortion: 0.03%, 2.96 KHz square wave and 14 KHz sine wave.

FM S/N Ratio: -89 dB RMS detector, -85 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.

STEREO OPERATION

Audio Input Impedance: 600 ohm balanced, 15 Kohm unbalanced.

Audio Input Level: -12 to +12 dBm.

Input Connector: XLR female.

Audio Frequency Response: ±015 dB from 30 Hz to 15 KHz. 

Total Harmonic Distortion + Noise: 0,03% @ 400 Hz

Intermodulation Distortion: 0,02%, 60Hz /7kHz 4:1 ratio +4dBu

Transient Intermodulation Distortion: 0.03%, 2.96 KHz square wave and 14 KHz sine wave.

FM S/N Ratio: -85 dB RMS detector, -82 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.

Stereo Separation: 30÷80 Hz ≥ -53 dB, 80Hz÷15 KHz ≥ -65 dB (Typ. 70 dB).

Crosstalk attenuation: Main to Sub -55 dB 30 Hz to 15 KHz

38 KHz Suppression: ≥ -70 dB (typ. -85 dB). 

Pilot Frequency: 19 KHz ± 1 Hz

Phase Pilot: ± 2° adjustable

Output Pilot: 1 Vpp., BNC female

Audio Filter Attenuation: ≥ -55 dB @ 19 KHz, > -45 dB 20 KHz to 100 KHz.

Modes: Stereo, Mono L+R, Mono L, Mono R.

AES/EBU OPERATION

Input Level: -10dBfs to 0dBfs

Input Connector: XLR female, optical TOS-LINK.

Input Impedance: 110 ohm.

Data Format: S/PDF,AES/EBU, IEC958, EIAJCP340/1201.

D/A Converter: 24 bit.

Sampling Frequency: from 32 to 96 KHz with automatic selection

Stereo separation (crosstalk): ≥50dB,100Hz to 5kHz

Amplitude response: ≤ ± 0.1dB, from 30Hz to 15kHz

FM S/N Ratio: -85 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.

SCA, RDS, AUX OPERATION

Input Connector: BNC female

Input Impedance: 3 Kohm.

Input Level: -3 to +6 dBm.

Frequency Response: ±0.2 dB, 40 KHz to100 KHz.

Input Connector: BNC female. Most SCA, RDS, AUX, performance parameters are determined primarily by the generator used.

AUXILIARY CONNECTIONS

N°2 RS485: Serial Interface connector RJ45 back panel.

Telemetry Interface: connector DB25F back panel.

ELECTRICAL (for 10kW to 40kW Transmitter)

AC Input Power: 230/400 VAC ±15%, 50/60 HZ(+/- 3HZ) single phase or 3-phase+N 

Power factor > 0.99

Cooling: Forced air 

MTBF > 20.000 Hours

ENVIRONMENTAL

Operating temperature: -10°C to +50°C.

Max Operating Altitude: 4000 mt.

Relative Humidity Range: 0 to 95% non condensing.

Protection against Lightening, Dust and Corrosion

PHYSICAL DIMENSIONS 

Mounting: 2 unit cabinet 

Size: 88mm. (H) x 484mm. (W) x 478mm. (D)

Weight: ~ 11 Kg.

OPTIONS AVAILABLE

Wide range of options available reduces the need of any additional equipment: 

High performances Stereo Encoder

Digital AES/EBU

Dynamic RDS Encoder with TMC Function

AOIP Audio Over IP

WEB TCP/IP and SNMP connectivity for remote Access

Japanese (JPN), Russian (OIRT) and more bands are options available.

Parallel Remote Control Connector Interface

Product Details
AXON 1200W
Reviews
No comments
Related products

Menu

QR code

Settings

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in